This cable resistance thermometer design is regularly used in high voltage applications. The FEP polymer coating also displays a high level of acid resistance.
| Type Designation: | CRP |
|---|---|
| Temperature Range: | -100 to 500 ° C |
| Common Sensor Types: | 1 Pt 100 B |
| Common Sensor Size: | 2 x 2.2mm, Thin film |
| Temperature Coefficient: | 0.3850 ohms/° C |
| Wiring: | 3 wire, marked red/red/white |
| Common Pocket Diameters: | Ø 3.0 to 10mm |
| Common Insulation: | Silicon rubber, PTFE |
| Common Stranding: | 7×0.2 |
| Common Sheaths: | PTFE, FEP |
| Tail detail: | 50mm tails, 10mm tinned |
Application Notes:
- Acid proof design
- Coating can cover whole sensor length
- Mineral insulated cable can be coated
Special Options:
- Duplex
- Higher accuracy sensors A, 1/3,1/5,1/10 DIN
- Other stranding options
- Pt 50, Pt 500, Pt 1000 and Pt 2000, Cu or Ni element
- 2 or 4 wires
- Tagging
- RT can be replaced with a thermistor
Looking for Cable Resistance Thermometer with Polymer Coating?
Our technical team can work with you to design, develop, and manufacture resistance thermometers, including Pt100s and Pt1000s, to your specific requirements. To start the process, complete the below enquiry form and we will be in touch.
Or call us now on 01246 261999 to discuss your requirements.
