This mineral insulated RTD probe is an inexpensive design usually for assembly into your own high volume equipment or to fit your own cold end fitting.

Type Designation:MRB
Temperature Range:-100 to 500 ° C
Common Sensor Types:1 Pt 100 B
Temperature Coefficient:0.3850 ohms/° C
Wiring:3 wire, marked red/red/white
Common Diameters:Ø 3.0, 6.0mm
Common Sheaths:316 SS
Cold End Max Temperature:150 ° C
Tail detail:20mm nominal

Application Notes:

  • Inexpensive termination
  • Ready for users to fit their own cold end fitting

Special Options:

  • Duplex
  • Reduced tips
  • Other diameters available
  • Sensors bent to shape
  • Compression Fitting
  • Cold end seal to 350 ° C
  • Higher accuracy sensors A, 1/3,1/5,1/10 DIN
  • Pt 50, Pt 500, Pt 1000 and Pt 2000, Cu or Ni element
  • 2 or 4 wires
  • Tagging
  • RT can be replaced with a thermistor
MRB-Mineral Insulated Resistance Thermometer with Basic Seal

Looking for Mineral Insulated Resistance Thermometer with Basic Seal?

Our technical team can work with you to design, develop, and manufacture resistance thermometers, including Pt100s and Pt1000s, to your specific requirements. To start the process, complete the below enquiry form and we will be in touch.

Privacy Pollicy(Required)
This field is for validation purposes and should be left unchanged.

Or call us now on 01246 261999 to discuss your requirements.