With this RTD probe you can fit your existing transmitter to the DIN Plate.

Type Designation:TRD
Temperature Range:-100 to 500 ° C
Common Sensor Types:1 Pt 100 B
Temperature Coefficient:0.3850 ohms/° C
Wiring:3 wire, marked red/red/white
Common Diameters:Ø 6.0, 8.0mm
Common Sheaths:316 SS
Head Connection:M4 Screws 33mm PCD
Cold End Max Temperature:100 ° C
Tail detail:75mm tails, 10mm tinned

Application Notes:

  • Ready for customer fitted transmitter (specify which type is intended to be used)
  • Inexpensive insert
  • Very cheap design if maximum is 225 ° C
  • Used in pocket/head assemblies
  • Suitable for quick replacement on plants
  • Industry standard size
  • Spring loaded for good thermal contact
  • DIN standard lengths available

Special Options:

  • Duplex
  • Higher accuracy sensors A, 1/3,1/5,1/10 DIN
  • Pt 50, Pt 500, Pt 1000 and Pt 2000, Cu or Ni element
  • 2 or 4 wires
  • Compression fitting
  • Tagging
  • RT can be replaced with a thermistor
Resistance thermometer insert with din
Resistance Thermometer Insert with DIN Plate

Looking for Resistance Thermometer Insert with DIN Plate?

Our technical team can work with you to design, develop, and manufacture resistance thermometer inserts to your specific requirements. To start the process, complete the below enquiry form and we will be in touch.

Privacy Pollicy(Required)
This field is for validation purposes and should be left unchanged.

Or call us now on 01246 261999 to discuss your requirements.