Mineral Insulated Thermocouple with Basic Seal

An inexpensive component for use by equipment manufacturers in their own products. These items would normally be installed into a specific assembly, or be part of a larger sensor assembly.

Type Designation:MTB
Temperature Range:-200 to 1250 ° C depending on thermocouple sensor type
Common Sensor Types:K, J, N, T, E
Common Diameters :Ø 1.5mm, 3.0mm, 6.0mm
Common Sheaths:Inconel, 316 SS, 321 SS, 310 SS, Pyrosil.
Cold End Max Temperature: 150 ° C
Tail Detail: 20mm Nominal

Application Notes:

  • Inexpensive termination
  • Ready for users to fit their own cold end fitting

Special Options:

  • Duplex
  • Diameters between 0.5 and 10.8mm
  • Reduced tips
  • Compression fittingSensors bent to shape
  • Weld pads or weld on tips
  • Cold end seal to 350 ° C
  • Insulated exposed or grounded junction
  • Tagging
MTB

Looking for Mineral Insulated Thermocouple with Basic Seal?

Our technical team can work with you to design, develop, and manufacture thermocouple assemblies to your specific requirements. To start the process, complete the below enquiry form and we will be in touch.

Name(Required)
Privacy Pollicy(Required)
This field is for validation purposes and should be left unchanged.

Or call us now on 01246 261999 to discuss your requirements.